 |
|
|
|
|
||||||||||
|
|
|
||||||||||
|
Technical Tips from Mark W. Persons |
|
FM RF Low-Pass Filter |
 |
| This may be your answer a problem
where an FM translator is causing interference to a 450 MHz two-way
radio system. The filter to attenuate the translator's RF harmonic in the 450 MHz communications band dramatically. You can use a Broadcast Concepts low pass filter board in an RF tight box with N or BNC connectors. This filer would be good for any FM broadcast transmitter facility where RF harmonics need to be attenuated. |
 |
| The specifications are listed on one
side of the filter and they are fairly impressive. We have just one left in stock at $236 plus shipping. Filters for up to 800 watts can be built in a similar fashion. |
|
The stories go on and on.
Stop in again sometime. I'll leave the soldering iron on for you.
|
|
Questions? Email Mark Persons: teki@mwpersons.com |
