 |
|
|
|
|
||||||||||
|
|
|
||||||||||
|
Technical
Tips from Mark W. Persons |
 |
Here is an example of a custom
modification to a CCA FM60G FM Exciter. A rotary switch was added to the
front to allow easy selection of the operating frequency. This change can
be done to the CCA FM100G Exciter as well.
|
 |
The frequency selector switch just fit inside, ahead of the modulated oscillator section. |
 |
Provision was also made at the
rear of the exciter to remotely turn the exciter on and provide a remote LED
lamp indicating that the exciter is running. Just one more special to come out of the shop. |
| February 8, 2016 email: Hi Mark, I like your frequency selector modification to a CCA FM60G FM Exciter. Doug Kehrig, WHDH TV in Newton, Massachusetts. |
|
The stories go on and on.
Stop in again sometime. I'll leave the soldering iron on for you.
|
|
Questions? Email Mark Persons: teki@mwpersons.com |
