Home
New  Equipment
Used Equipment
Our Office
What We Do
Web Links
Tech Tips
Engineer's Log
Friends
Personal
Contact Us

Radio Broadcast Technical Consulting and Sales
 
10032 Island Drive, Brainerd, MN  56401

Main/Auxiliary RF Antenna Switch
1 KW, 0-2 GHz, Three-Ports

Built by M. W. Persons and Associates, Inc.
Made in Minnesota


The M. W. Persons Three-Port Main/Auxiliary Antenna Switch is for 1000 watts or less of RF power.  It will quickly select between main and auxiliary transmitters by pushbuttons on the front or by remote control inputs. It is capable of switching 0 to 2000 MHz(2 GHz) RF with VSWR of 1.07:1 or less and is 1.01:1 in the 88 to 108 MHz FM broadcast band.  Tally lights indicate on the panel and 2 VDC status outputs tell a remote control system which transmitter is connected to the antenna.  For AM broadcast switches see the AM RF-2 Switch.
 
The switch has three N-F connectors for the RF.  There are relay contacts to control interlocks on the transmitters so the transmitter not connected to the antenna is muted to prevent it from turning on.  There is also a switch on the front that can be set to "Test" so the otherwise muted transmitter can be turned on for testing into a dummy load.  A 24 VDC switching power supply is included so the panel can be powered by 110-120 VAC 50/60 Hz.

The switch is built on a 19 inch wide by 3-1/2 inch high standard aluminum rack panel.  One-year warranty and comes with schematic documentation. 


RF-3A Three-Port Switch with 1000 watt capability is $770.00.
RF-4A Four-Port Switch with 250 watt capability is $860.
00.
N to N RF cables are also available. 
Add shipping.  State tax is charged if it goes to Minnesota or Wisconsin. 
We need to know at the time of order if the transmitters involved need a closed or open interlock in order to run.
 

Questions?  Email Mark Persons:  teki@mwpersons.com        

    Return to Home Page 

page last edited 07/10/2016